JÄTTEIDEN SIIRTOLAITOS - ETS-45/500





TECHNICAL SPECIFICATION

SINGLE CYLINDER                        

Overall length / width / height, mm

2900 / 2100 / 2325

Overall weight, tons

3.6

Charge box length / width / height, mm     

1520 / 1900 / 710

Charge box capacity, m³

2

Charge box swept volume, m³

1.52

Ram head penetration, mm

250

Dry cycle time, seconds

45

Throughput per hour, m³

150

System pressure, bars

200

Boost pressure, bars

220

Operating pressure (normal), tonnes

40

Operating pressure (boost), tonnes

50

Ram face pressure running, kg/cm²

4.47

Ram Boost pressure, kg/cm²

5.43

Bore of cylinders, mm

115

Diameter of hard chromed rod, mm

63

Electric motor size, kW

15

Reservoir capacity, liters

60

ETS-45/500 is our small sized Transfer Station compactor with a capability of handling up to 150 cubic meters per hour of waste with a swept volume of 1,52 cubic meters, making this basic compactor an efficient solution in the design of small volume Refuse Transfer Stations. This reinforced stationary compactor is capable of transfer waste material quickly and efficiently into the large compaction containers with payload at least 13 tons. Compaction ram penetrates the container by 250 mm to ensure stable compaction and eliminating spill-back. The press construction may include hydraulic grab claw container attachments for quick and comfortable container changeover. The compactor is operated by control desk located at the compactor. Compaction container capacity is from 20 to 44 m³.

For hooklift/roll-off tippers or sea freight containers or container trailers
Container 80 and 100% full light
Fill level, error or service requirement notification via GSM
GSM - alarm systems
Hardox 450 plate in bottom and ram construction
Pendulous steel scraper in front of the ram
Problem-free emptying supported by three-sided conical container body or floating roof
Discharge door with ratchet closure, hinges on the side
Cylinder mounted in rotatable eyelets
Maintenance friendly electrical switch cabinet and hydraulic unit are easily accessible from the side.
Electronic safety controller is easily expandable for many additional functions
Sandblasted and painted as per EN ISO 12944 C3M

 

Pre-chamber compaction system
Several operating variants including a fully automatic version
Individual hopper designs
Diverse hydraulic units with standard power classes up to 75kW
Light barriers as start device and / or as overfill prevention device
Several variants of remote control as cable, wireless, from desktop
Traversing system for the compaction containers
Container weighing system
Automatic or manual closure gate (guillotine)
Hydraulic Locking mechanism for container positioning to press
Attached tipping Hopper up to 60m3 for loading waste in to press
Feeding conveyer
Ramp for vehicles max 30 tons
Cover hopper over filling opening
Discharge door with seal
Maintenance hatch with safety limit switch
Additional integrated or portable container tipping mechanisms
Bin Lifting device integrated or stationary with own power pack
230/380V switch box panel
Timer to start / stop compaction
Automatic start with photo or ultrasonic sensor
Oil heating system
Oil cooling system
Steel or Aluminum lid
Waste feeding channel
Guiding rails, 3m or 6m

ETS-45/500 is our small-sized Transfer Station compactor with a capability of handling up to 150 cubic meters per hour of waste with a swept volume of 1.52 cubic meters, making this basic compactor an efficient solution in the design of small volume Refuse Transfer Stations. This reinforced stationary compactor is capable of transferring waste material quickly and efficiently into the large compaction containers with a payload of at least 13 tons.

The compaction ram penetrates the container by 250 mm to ensure stable compaction and eliminates spill-back. The press construction may include hydraulic grab claw container attachments for quick and comfortable container changeover. The compactor is operated by a control desk located at the compactor.

Compaction container capacity ranges from 20 to 44 m³.

 

Revolutionizing Waste Management with Advanced Solutions: WASTE STATION Equipment and More

Ecopress Waste Systems takes the lead in the dynamic landscape of waste management solutions. We introduce cutting-edge WASTE STATION equipment, station frames, SCHAKT technology, and specialized solutions for bulky waste, paper, cardboard, plastics, and recycling. Our comprehensive approach to waste management encompasses durability, efficiency, and effectiveness, providing low-maintenance solutions that contribute to a cleaner environment and support the circular economy.

Our WASTE STATION equipment, including frames and SCHAKT technology, is meticulously crafted to meet the diverse needs of municipalities, recycling centers, and recycling companies. Whether you are handling bulky waste, paper, cardboard, or plastics, our solutions are designed for optimal efficiency in waste management processes.

Key Features of Ecopress Waste Systems' Solutions:

1. Durability and Efficiency:
Our WASTE STATION equipment is engineered for durability, ensuring long-lasting performance in demanding waste management environments. With a focus on efficiency, our solutions streamline waste processing, contributing to a reduction in overall environmental impact.

2. Effectiveness and Low Maintenance:
The effectiveness of our waste management solutions is evident in their ability to handle various waste types, from bulky waste to recyclables. Additionally, our equipment is designed for low maintenance, minimizing downtime and ensuring consistent performance.

3. Environment and Circular Economy:
Ecopress Waste Systems is committed to environmental responsibility. Our solutions support the circular economy by optimizing recyclability and reducing waste volume. By choosing our WASTE STATION equipment, you actively contribute to a more sustainable and eco-friendly waste management approach.

4. Collaboration with Municipalities and Recycling Companies:
We collaborate with municipalities, recycling centers, and recycling companies to tailor our solutions to their specific needs. Our partnerships with organizations like ORGAB, COOR, RAGNSELLS, VAFAB, VIVAB, and NSR further underscore our commitment to advancing waste management practices.

5. Efficient Transportation Solutions:
Our commitment to efficiency extends to transportation solutions, ensuring timely delivery of our WASTE STATION equipment to various regions across Europe, including Norway, Sweden, Finland, Denmark, Latvia, Lithuania, Poland, England, Ireland, and Iceland.

In conclusion, Ecopress Waste Systems stands as a reliable partner for organizations seeking advanced waste management solutions. Our WASTE STATION equipment, combined with SCHAKT technology and efficient frames, sets new standards for durability, efficiency, and environmental responsibility. Join us in shaping a greener future by embracing our innovative solutions and contributing to a sustainable circular economy.

Kontaktformulär

Thank you for your attention, the message has been sent successfully.

Adress

Osmussaare tn 8, 13811 Tallinn, Estonia

Telefon
    +372 58 00 9999