page ico
Stationary compactor
 
Stationary compactor is intended to press different types of waste; it reduces volume of storable waste as well as transportation costs. Depending on type of waste, compaction rate of stationary compactor can vary from 1:3 to 1:10, what guarantees economical efficiency and payback of equipment.

 

Unlike mobile compactor where operation process is suspended for container emptying time, stationary compactor system allows organizing continuous process of waste pressing. Suspension of stationary compactor operation process occurs only during the change of containers.

 

Besides, compared to mobile compactor, larger volume of stationary compactor replaceable containers allows to load and transport larger volume of waste materials.

Stationary compactor is suitable for operation in all weather conditions at temperatures from -50oC to +50oC. Low noise level is ensured during operation. Pressing system is equipped with pressure sensors (mechanical sensors are not applied) what prevents operation failures during pressing. All compactors are fully equipped with high level safety protection, such as oil level sensors, time limit sensors and temperature sensors.

Pressure and compacting cycle time could be adjusted. All compactors meet requirements of EU directives 89/392EEC, 91/368EEC, 93/44EEC, 93/68EEC on equipment and machinery safety, and are provided with CE marking and user's manual.

 

 

  Technical characteristics of stationary
compactor ESC:
 

ESC-30
ESC-35
Pressing force (max.), t
30
35
Pressure in hydraulic system, bar 180  200 
Electric motor, kW 5,5  7,5 
Press plate height, mm 500  500
Distance from the bottom of tunnel to
the compactor bottom, mm
670  670 
Loading chamber size, mm 1850x1500  1850x1500 
Volume per load (without bunker), m3 2,5  2,5 
Output capacity per cycle, m3 1,46  1,46 
Output capacity per hour (doesn't consider
containers replacement time), m3/h
up to 80  up to 80 
Compacting cycle, sec 62  62 
Weight, kg 2500  2700 


Advantages of stationary compactor: 

  • reduction of volume of waste;
  • decrease of transportation costs due to reduction of volume of waste;
  • possibility of selling of some types of recyclable waste (paper, cardboard, plastic, etc.); 
  • possibility to transport larger volume of waste at once; 
  • continuous operation process.

Materials suitable for pressing:

  • wrapping paper and cardboard, waste paper, printing waste;
  • plastic, polyethylene, plastic bottles and packing;
  • household and mixed waste;
  • cellulose and other woodworking waste;
  • different waste from production facilities, warehouses and terminal;
  • cans (tin, aluminium), metal drums.

Loading types:

Manual Loading
Waste materials are loaded manually. After filling the chamber pressing is started. 

 


 

Loading with bins using bin lift system  

Compactor is equipped with special bin lift system for 240-1100L containers. Filled container is placed towards the bin lift system and emptied into the compactor, after container is emptied pressing can be started. 

 

Loading with forklift

Waste is gathered into special TIP-containers, which can be easily emptied into compactor with the help of forklift.

 

 


Loading through waste feeding channel

If waste materials appear to be inside of the building, then it possible to construct waste feeding channel which connects building and loading chamber of compactor. Remote control is placed inside of the building.

 

Loading with conveyor

Waste can be loaded into the compactor with conveyor. Waste is loaded directly to loading chamber which is connected to compactor with waste feeding channel.

 

 

Options:

Waste outcome block

Metal wires and tubes are inserted into the pressing channel through the holes in the backdoor. It allows preventing waste fallout during container transportation.

 

 

Tent cover

Prevents waste fallout during transportation.

 

 


 

Guiding rails

Required for fast and precise installation of compactor towards waste feeding channel or hopper. 

 

 


Additional remote control panel, signals 75% and 100%

Additional remote control panel allows operating the compactor from any side. Signals 75% and 100% indicate when the compactor should be emptied.

 


Fastening device for replaceable container

Allows tightening the replaceable container to the compactor and keeps it fastened during pressing operation.

 


 

Locking device

Secure locking device prevents unexpected opening of rear door of replaceable container.

 


 

Sliding roof

Sliding roof allows emptying the container even with tightly pressed waste in an easy and efficient way.

 

 

 

Stationary compactor ESC – general drawing: 

 

 

 

 

 

 

 

 

  Overall dimensions: 
 

Mega Compact 
Length, mm2970 2520
Width, mm
2030 2030
Height, mm 1625  1625

 

 

Replaceable container EC - general drawing:



  Overall dimensions of replaceable container EC: 
 

15m3
20m3  30m3
35m3
40m3 
Length, mm
4445
4945  644  6945 7445 
Width, mm  2450  2450  2450  2450 2450 
Height, mm 2550  2550  2550  2550  2550 












ECOPRESS EC-35
(volume 35m3)










ECOPRESS EC-30 (replaceable container, volume 30m3)











ECOPRESS EC-20 (replaceable container, volume 20m3)










ECOPRESS ESC (stationary compactor)












ECOPRESS ESC (stationary compactor)












ECOPRESS ESC (stationary compactor)













ECOPRESS ESC (stationary compactor)